Lowes Fence Panels – The wooden fences material are a very attractive alternative to delimit areas in the garden. For this goal, this time, we will show you how to install a model of wooden panels, which will let us build a discreet area and shielded from the eyes of the most unusual. In the market, we will find a wide range of wooden fences, so that we can choose the model that we like the most.
To fix the posts to the ground, we will use galvanized iron pegs. We insert the posts into the metal supports and fix them with some screws. Then, we fastened the fences to the posts with metal squares. We reinforce the protection of the fences with a lasur and finally, we put some finishing pieces on the posts’ posts. After tracing the route and pointing to the points where we will place each pole of Lowes fence panels, we will nail the pegs in the ground a bit, using a wooden block as a martyr and hitting with a club. We check that the metal parts are plumb and introduce them correctly.
Next, we insert the posts into the bases and make some pilot holes, with the drill and a wood drill, in our case 4 mm diameter. Replace the bit with a hexagonal socket wrench and hold the post, with some screws and galvanized washers, to avoid rusting with moisture. With all the posts tied, we mark the position of the squares, place them and fix them with their corresponding screws.
We can start to put the first Lowes fence panels. We present the panels in their position and we screw the metal brackets to the fences. It is much easier to carry out this work with the help of another person. But, if you have no option and you are going to do it alone, we advise you to place some squares on the bottom of the posts to be able to support the pieces of wood. In the same way, we fix all the panels of treated wood, ideal to be out in the open, until completely closing the desired area.
Once we have prepared the background for Lowes fence panels lasur, we apply it on the entire wooden surface with the help of a paint gun. When the product has dried, we give the lasur using the same tool. To finish the work, we apply assembly adhesive inside the metallic finishing pieces and we put them on the post fence; thus, in addition to protecting the fence, we will decorate the fence. In this simple way, we have closed this area of the garden, getting an intimate and cozy space. Choose the fence model that you like the most and following the guidelines that we have given you, you will be able to do the Lowes fence panels job without any problem and obtaining an excellent result.